Product Guides

Best Custom Work Shirts: What to Specify Before Ordering

A practical guide to specifying custom work shirts, including fabric, protection, decoration method, logo placement, artwork, sizing, samples, and reorders.

Man wearing coordinated denim work shirt and jeans

Most problems with a custom shirt order begin before a logo reaches the embroidery machine. The buyer asks for “navy FR shirts with our company name,” but the request does not identify the base garment, logo size, placement, thread colors, individual names, size breakdown, or whether a patch must be removable. Production then depends on assumptions that are difficult to correct after approval.

The best custom work shirts start with a clear specification. One page should tell the supplier what the shirt must do, how it should look, who will wear it, and which details cannot change.

Select the Base Shirt Before Discussing Decoration

Close-up of embroidered denim work shirt

Customization does not turn an unsuitable shirt into appropriate workwear. Start with the job: climate, movement, sleeve coverage, visibility, and any FR or arc-rating requirement. Then name the exact base style, color, and fabric weight.

General company uniforms may use lightweight woven or knit shirts. Jobs with an identified thermal hazard may require rated clothing chosen through the employer’s assessment. The BOCOMAL FR work shirt collection includes lightweight, vented, midweight, and heavyweight constructions, so “FR shirt” is still too broad for a purchase specification.

A crew working in rough contact may prefer the 0932 8.5 oz stretch-canvas FR shirt. It is CAT 2 with an ATPV of 12 cal/cm² and has a zippered chest pocket. A company that wants a more conventional button-front uniform may instead specify the 10801 7.5 oz cotton-twill FR shirt, also CAT 2, with an ATPV of 9.2 cal/cm². Those are different garments even if both are ordered in the same color with the same logo.

Record the product name or style number. A description such as “heavy navy work shirt” is not precise enough for a repeat order.

Put the Required Performance in Writing

For ordinary workwear, the performance section may be short: fabric, sleeve length, preferred weight, pocket arrangement, and any visibility requirement. Protective apparel needs more detail.

List the applicable workplace requirement, required arc rating or PPE category where relevant, and the areas that must remain covered. Do not ask the decorator to infer protection from the occupation. Two employees with similar job titles can perform different tasks and require different clothing systems.

Decoration on a protective garment must be reviewed as part of that garment. Ordinary thread, backing, patches, heat-transfer material, or reflective trim should not be assumed compatible with FR or arc-rated clothing. Keep logos away from labels, closures, vents, reflective material, and other functional components unless the approved design specifically allows the placement.

Our guide to ordering custom FR clothing for a company covers the broader process of defining hazards, reviewing ratings, and managing a crew order. The specification for a custom shirt should build on that decision rather than reopen it during artwork approval.

Define the Decoration Method and Exact Placement

Crew welding industrial pipe in work shirts

“Logo on the chest” leaves several decisions unresolved. State whether the decoration will be direct embroidery, a sewn patch, a hook-and-loop patch, or a printed design. The BOCOMAL custom garment request page lists logo and name embroidery, direct embroidery, patches, hook-and-loop options, printed logos or patterns, reflective-tape placement, sleeve changes, special sizing, and functional feature design among the available customization routes.

For each decoration, specify:

  • Finished width and height
  • Left or right side
  • Distance from the nearest seam, pocket, or closure
  • Orientation and reading direction
  • Thread, print, patch, and border colors
  • Whether the same design appears on every size

Placement has to be checked on the garment, not only on a flat artwork page. A four-inch logo may fit above a pocket on an XL shirt but crowd the same area on a Small. A sleeve mark can rotate out of view when the arm hangs naturally. A large back design may be partly covered by harness straps or a high-visibility vest.

Supply Artwork That Can Be Reproduced

Send the original vector file when available, along with a clear reference image showing the correct colors. A low-resolution screenshot may look acceptable on a phone while producing rough edges, missing small text, or uncertain color matching at production size.

Very fine lettering often needs to be simplified for embroidery. If the logo includes gradients, shadows, or many colors, approve a reproducible workwear version rather than leaving those decisions to production.

Name personalization needs its own file. Use one row per employee with the name exactly as it should appear, selected shirt size, base-garment color, and any department or title. Keep capitalization and punctuation consistent. A nickname added later in an email thread is easy to miss; one controlled roster is safer.

Build the Size Breakdown From Real Wearers

Do not estimate a crew order from last year’s distribution without checking who is being outfitted. Base styles may fit differently, and the workforce may have changed.

Collect each wearer’s chosen size after reviewing the product chart and, where practical, trying on the undecorated garment. Include tall or extended sizes as separate line items. If employees will wear the shirt over a base layer or beneath a jacket, use the same setup during the fitting.

Then summarize the order by style, color, and size. The individual roster and the purchase total should agree. If they do not, resolve the discrepancy before sending the order.

BOCOMAL currently states that minimum quantities vary by customization. The custom request page lists a 40-piece minimum per style for basic embroidery, with color and size mixing allowed. Confirm the current minimum and how the supplier defines a “style” for the requested work before finalizing the assortment.

Decide What Must Be Approved Before Production

The approval package should show the exact base garment, decoration method, artwork size, placement, colors, spelling, and quantities. A physical sample may reveal puckering, rubbing beneath a harness, or a logo hidden by a pocket flap.

Write down who has authority to approve. A supervisor may verify workwear performance, while marketing confirms the logo and purchasing confirms quantities. Production should not begin with three separate contacts giving conflicting revisions.

Version control can be simple. Put a revision number and date on the artwork, roster, and order summary. When something changes, issue a new version and identify what it replaces. Avoid approving a design through a message such as “looks good” when several attachments are in the thread.

Plan for Care, Replacement, and Reorders

The decoration and the base shirt should tolerate the same approved care process. Ask whether the chosen embroidery, patch, or print changes washing, drying, or ironing instructions. This is particularly important for uniforms exposed to industrial soil or frequent laundering.

Keep the final specification after delivery. Record the base style number, garment color, decoration file, thread or print colors, placement dimensions, approved sample, and size list. When one employee needs a replacement, the purchaser can reproduce the approved shirt instead of rebuilding it from memory.

Also decide how employee names will be handled when staff changes. A removable hook-and-loop name patch may suit a role with frequent turnover. Direct embroidery is permanent and usually presents a cleaner integrated appearance, but the garment cannot be reassigned without the old name remaining.

A Practical Custom Shirt Specification

A complete request can fit on one or two pages if the information is organized clearly:

  • Exact base shirt and color
  • Required performance and rating
  • Decoration method
  • Artwork file and approved colors
  • Placement diagram with dimensions
  • Employee roster and size breakdown
  • Quantity by style, color, and size
  • Approval contact and revision number
  • Care requirements
  • Reorder reference

That document prevents the supplier from filling gaps with reasonable but unapproved choices. It also gives the buyer a reliable way to compare quotations: each vendor is pricing the same shirt, artwork, placement, and quantity.

FAQ

What should I send when requesting custom work shirts?

Send the base shirt style, color, size breakdown, quantity, decoration method, production-ready artwork, placement dimensions, personalization roster, and any required protective performance.

Is embroidery suitable for FR shirts?

It may be, but the materials and placement must be reviewed for the garment and workplace requirements. Ordinary embroidery supplies should not be assumed compatible with protective clothing.

How large should a chest logo be?

There is no single correct size. It has to fit the smallest garment in the order without crowding the pocket, closure, seam, label, or functional feature.

Should we order a sample first?

A sample is especially useful for a new base style, complex logo, unusual placement, or large crew order. It lets the team check fit, appearance, and interaction with work equipment before full production.

What information should be saved for reorders?

Keep the base product and color, artwork source file, decoration method, dimensions, placement, thread or print colors, approved proof, roster format, and the supplier’s order reference.